29
2024
-
02
Application, structure and working principle of wet lattice ball mill
Author:
1. uses
Wet lattice ball mill is a kind of professional equipment, mainly used in ore, coal mine,beneficiationOre grinding and beneficiation processes in industries such as plants. It has the characteristics of grinding, fine separation and uniform mixing, which can effectively improve the crushing degree and beneficiation efficiency of the ore, thereby improving the production efficiency. Our company specializes in selling various specifications and models of wet grid ball mills, with rich experience and technical support, to provide customers with customized solutions. Whether you need to buy equipment or seek technical support, we are able to provide you with quality services and satisfactory products.
2. working principle and structure overview
Wet grid ball mill for edge drive, tail discharge, a bin,open flow ball mill
1Feeding device
The feeding device is a spiral hopper, which is connected with the feeding device by bolts, and rotates together with the cylinder. The material is scooped by the spoon head into the mill through the spiral hopper and the conical bushing installed on the hollow shaft.
2Rotary part
The cylinder is made of steel plate coil welding, both ends of the flat end cover structure, steel plate material16MnorA3Both ends of the feed and discharge hollow shaft is made of carbon cast steel (ZG35B) manufacturing, bolt the hollow shaft and the cylinder end flange, the front end is inlaid with a stepped liner, which can enhance the crushing ability of the steel ball to the material, the installation of the stepped liner is related to the turning of the mill, the thin end of the liner is in the direction of rotation, do not install the wrong, otherwise it will have a greater impact on the crushing effect, and will aggravate the wear of the liner, the rear end Corrugated liner, so that the steel section of the material has a strong grinding effect.
Two manhole doors are symmetrically arranged in the barrel of the mill to clean the steel ball, repair and replace the lining plate, grate plate, etc. The head of the lining plate bolt is made into an oval shape to reduce the stress concentration of the lining plate hole and reduce the rupture of the lining plate.
Grate plate and lining plate are made of wear-resistant high manganese steel.
3Main bearing
The rotating part of the mill is supported by two main bearings. The structure of the main bearings at the feed end and the discharge end is basically the same, only the oil scraper is different. The main bearing itself is composed of the bearing seat, the bearing cover, the spherical bush and other main parts. When the material passes through the hollow shaft, a large amount of heat is transferred to the main bearing, so cooling water must be supplied to absorb the heat to ensure the normal operation of the mill. Cooling water first into the bearing seat, cold However, the lubricating oil enters the series water channel of the spherical tile to cool the spherical tile. Due to different specific conditions, the cooling water consumption needs to be adjusted, so a water quantity regulating valve is installed before the three-way cock.
If the grinding is stopped for a long time in winter, the cooling water needs to be closed, and the accumulated water in the spherical tile string channel must be discharged to prevent the spherical tile from freezing and cracking. Therefore, the main bearing is equipped with a siphon structure. The accumulated water in the spherical tile string channel can be discharged only by closing the three-way cock. In order to form a siphon effect, attention must be paid to the cooling water into the main bearing seat pool when the mill is started. In order to fill the pool, first open the cock to allow air to escape, and then close the cock, so in the long-term grinding, close the three-way cock can drain all the water in the main bearing.
The main bearing is lubricated by an oil ring fixed on the hollow shaft. with oil lubrication, oil ring The oil in the belt is scraped into the oil groove by the scraper and flows to the hollow shaft. In order to prevent oil leakage, the two ends of the main bearing are equipped with oil scrapers, and the end near the cylinder is equipped with oil scrapers. These other parts are related to the turning of the mill during installation.
The mill body expands due to heat, and the discharge end is equipped with a transmission device. The mill body is not allowed to expand to the discharge end, but only to the feed end. Therefore, the length of the main bearing spherical tile at the discharge end and the hollow journal at the discharge end are matched,The main bearing spherical tile at the feed end and the hollow journal at the feed end are matched in length.Clearance,Shrinkage andThe amount of expansion.
4Gear cover
In order to protect large and small gears and lubricate large and small gears, a gear cover is provided, in which a sealing device and an oil leakage prevention device are provided.
5Transmission device
The motor drives the small gear through a pair of rubber block couplings, and the small gear drives the large gear fixed on the cylinder flange to rotate the mill.
Wet Lattice Ball Mill,Ball Mill,Overflow type ball mill
Previous Page
WhatsApp |