Welcome to the official website of Chaoyang Liaoxi Heavy Machinery Manufacturing Co., Ltd!

Tel:

PRODUCTS

Products

Mixer

Key words:

Classification:

Steel mill pellet equipment

Hotline:

+86 13904217870

wgl@cylxzx.com

Consulting

Mixer

Product introduction:

Cylinder mixer is one of the main equipment of the sintering plant, a mixer is to sinter before the powder, concentrate, fuel, solvent and other mixed evenly wet. The secondary mixer is mainly used to granulate the material, so that the material composition is uniform, the moisture is moderate, and the air permeability is good. It can also be used in other metallurgical industries and powder materials mixing operations. The length of the cylinder can be made according to customer needs. The transmission form is divided into two forms: gear rotation and rubber wheel transmission.

Technical parameters:

Product Name	Model specifications	Design ability (t/h)	Main technical performance
Mixer	φ2.2 ×7m	100	Cylinder inclination angle 2, cylinder speed 0.73-7.3r/min, modulus 22, tooth number z₁= 23 Z₂= 146, gear ratio 6.35
Mixer	φ2.2 ×9m	120	Cylinder inclination angle 2, cylinder speed 0.83-8.3r/min, modulus 22, tooth number z₁= 23 Z₂= 146, gear ratio 6.35
Mixer	φ2.8 ×6m	170-290	The specific gravity of the material pile is 1.7±0.1, the resting angle of the material is 35, the filling rate is 12.5-15.1, the inclination angle of the cylinder is 1.6, the rotation speed of the cylinder is 7.3rpm, the mixing time is 70sec, and the water supply of the mixer is supplied.4m³ /h, feed water pressure 0.3-0.4Mpa, open gear ratio 146/27
Mixer	φ2.8 ×7m	380	Cylinder inclination angle 2 °, cylinder speed 7.4rpm, modulus 28, tooth number Z₁= 17 、 Z₂= 160, gear ratio 9.412
Mixer	φ3 ×9m	440	Cylinder inclination angle 2 °, support number 2, cylinder speed 6.9rpm, modulus 28, tooth number Z₁= 17 Z₂= 172, gear ratio 10.11
Mixer	φ3 ×10m	300-320	Cylinder inclination angle 2 ° Cylinder speed 6.5rpm
Mixer	φ3.2 ×13m	320-350	Cylinder inclination angle 1.5 ° Cylinder speed 6.9rpm
Mixer	φ3.4 ×13m	520-600	Cylinder inclination angle 2.2 cylinder speed 7rpm
Mixer	φ3.5 ×16m	420	The inclination angle of the cylinder is 1.5, the filling rate is 14.4, the rotation speed of the cylinder is 6.4rpm, the mixing time is 5min, the modulus is 32, and the number of teeth is z.₁= 21 、 Z₂=176、gear ratio 8.38
Mixer	φ3.8 ×14m	880-950	Cylinder inclination angle 2.5 cylinder speed 6rpm
Mixer	φ4.0 ×18m	420-500	Cylinder inclination angle 1.8 ° Cylinder speed 4.7rpm
Mixer	φ4.4 ×18m	880-950	Cylinder inclination angle 2 ° Cylinder speed 6rpm

Iron powder dryer

Ring cooler

辽西重型机械

Links:Chaoyang Yellow Pages | Chaoyang Enterprise Network

Website Construction: Power of Chinese Enterprises Jinzhou | SEO Tags