28

2024

-

02

The use, structure and working principle of centrifugal powder separator

Author:


Purpose of 1. Machine

This machine is a powder grading equipment, mainly used in cement industry cement and raw material circle flow grinding equipment, can also be used in chemical industry, metallurgy and other industrial sectors.

II2. Structure overview and working principle

1Structure Overview

This machine is mainly composed of transmission part, spindle part and inner and outer shell.

The transmission part includes an electric motor,Gear reducer,Such as composition. The motor drives the main shaft to rotate through the cylindrical helical gear pair.

Spindle part includes spindle,The base (the base and the reducer support are bolted to the upper cover channel steel), large fan blade, small fan blade, spreading tray and distribution tray hub. The large and small wind blades are respectively fixed on the large and small fan rods with bolts. The two large wind blades on the same diameter can move inward or outward in the radial direction as required. The number of large and small wind blades can be increased or decreased as required.

The shell of this machine is composed of the top cover, the inner and outer cylinders, and the inner and outer cones. The inner walls of the inner and outer cylinders are provided with replaceable lining plates. The inner and outer cylinders are connected by an upper bracket. The lower end of the inner cylinder is connected with the return fan blade by bolts. The return fan blade is at a certain angle to the diameter in the radial direction. The lower end of the inner cone is the coarse powder outlet. The lower end of the outer cone is the fine powder outlet. The inner and outer cones are connected by the lower bracket.

The whole machine is supported by four structural supports fixed on the outer cylinder.

2Working principle

Due to the centrifugal force, the coarse and fine mixed materials entered by the feeding slide and landed on the scattering tray are uniformly thrown from the scattering tray to the lining board of the inner shell. Due to the impact, the large particles of materials lose their kinetic energy and fall into the coarse material pipe. The remaining materials are brought to the small wind blades by the rising airflow, where they are separated again, and the qualified fine powder continues to rise to the big wind blades, it is brought to the circumferential space between the inner and outer shells by the air flow. Under the action of the air flow that circulates and moves spirally downward, the dust generates centrifugal force and throws it to the inner wall of the shell. The air flow that moves downward along the ring space enters the space of the inner shell through the gap of the return fan blade. This is the case. The air flow continuously circulates in the closed separator to separate materials.

 

Centrifugal separator,Cyclone separator,Rotor separator