Welcome to the official website of Chaoyang Liaoxi Heavy Machinery Manufacturing Co., Ltd!

Tel:

PRODUCTS

Products

Cement Mill

Key words:

ball mill

Classification:

Hotline:

Cement Mill

Product introduction:

Cement mill is the key equipment for crushing materials after being crushed. Ball mills are widely used in cement, silicate products, new building materials, refractory materials, fertilizers, ferrous and non-ferrous metal beneficiation and glass ceramics and other production industries, dry or wet grinding of various ores and other grindable materials.

Technical parameters:

Product Name	Specifications	Design ability (t/h)	Main technical performance
cement mill	φ2 ×9m	9.5-10 (Open flow)	Feeding particle size ≤20mm Product fineness 4900 hole/cm²Sieve, Sieve residue 5-8%, Barrel speed 23.88r/min
cement mill	φ2.2 ×6.5m	14-15	Feeding particle size ≤25mm, Product fineness 4900 hole/cm²Sieve, Sieve cement 6-8%, Barrel speed 21.4r/min
cement mill	φ2.2 ×7m	12-13 (closed circuit)	Feeding particle size ≤25mm, Product fineness 4900 hole/cm²Sieve, Sieve cement 6-8%, Barrel speed 21.4r/min
cement mill	φ2.2 ×7.5m	13--15	Feeding particle size ≤25mm, Product fineness 4900 hole/cm²Sieve, Sieve cement 6-8%, Barrel speed 21.4r/min
cement mill	φ2.2 ×13m	16--18 (dry process, open circuit)	Feeding particle size ≤25mm, Product fineness 4900 hole/cm²Sieve, Sieve residue cement 5-8%, Barrel speed 20.3r/min
cement mill	φ2.4 ×7m	14--19 (closed circuit)	Feeding particle size ≤20mm, discharge fineness 4900 hole/cm²Sieve, Sieve residue 5-8%
cement mill	φ2.4 ×8m	16-17 (Circled Flow Production)	Feeding particle size ≤25mm accounting for more than 80 percent, Max.25mm, Product fineness 88 μm, Sieve residue below 8%, Barrel speed 20.3r/min
cement mill	φ2.4 ×9m	17-19	Feeding particle size ≤15mm, 4900 hole/cm²Sieve, Sieve residue 6-8%
cement mill	φ2.4 ×10m	20-22	Feeding particle size ≤15mm More than 80% Max.25mm, Product fineness 4900 hole/cm², Sieve residue 5-8%, Barrel speed 20.3r/min
cement mill	φ2.4 ×12m	25-27 (Circled Flow Production)	Feeding particle size ≤15mm, Product fineness 4900 hole/cm²Sieve, Sieve cement 6-8%, Barrel speed 20.3r/min
cement mill (Three bins for bearing mill)	φ2.4 ×12m	12 (Circled Flow Production)	Feeding particle size ≤25mm, Product fineness -180 mesh ≥ 80%, Barrel speed 20.3r/min
cement mill	φ2.6 ×10m	25-27	Feeding particle size ≤15mm, Product fineness 4900 hole/cm²Sieve, Sieve cement 6-8%
cement mill	φ3.8 ×13m	70-80 loop flow production	Feeding particle size ≤15mm The following accounts for more than 80%, Product fineness 80μm, Sieve residue below 3%, Barrel speed 16.3r/min
cement mill (double sliding shoes)	φ3.8 ×16m	70-80	Feeding particle size ≤15mm The following accounts for more than 80%, Product fineness 80μm, Sieve residue below 3%, Barrel speed 16.3r/min
cement mill	φ4.2 ×13m	170-180 cycle flow production	Feeding particle size ≤1mm The following accounts for more than 80%, Product fineness 80μm, Sieve residue below 3%, Barrel speed 15.6r/min
cement mill	φ4 ×13.5m	90-100 cycle flow production	Feeding particle size ≤5mm The following accounts for more than 80%, Product fineness 80μm, Sieve residue below 3%, Cylinder speed 16 r/min
high fine grinding	φ1.83 ×7m	7-8 (Open-flow production of clinker for shaft kiln)	Feeding granularity ≤ 20-25mm, Fineness: specific surface area2800 cm²/g
high fine grinding	φ2.2 ×9.5m	16-19	Feeding particle size ≤5mmThe following, Feeding moisture ≤ 1%, Product fineness 4900 hole/cm², Sieve residue below 4-6%, Barrel speed 21.4r/mi
high fine grinding	φ2.2 ×11m	18-20	Feeding particle size ≤5mmThe following, Feeding moisture ≤ 1%, Product fineness 4900 hole/cm², Sieve residue below 2-4%, Barrel speed 21.4r/mi
high fine grinding	φ2.4 ×13m	25-27 (Open production)	Feeding particle size 10-15mm, specific surface area 3000-4000cm²/g
high fine grinding	φ2.6 ×13m	30-33 (Open production)	Feeding particle size ≤15mm, specific surface area 3000-4000cm²/g
high fine grinding	φ3.2 ×13m	50-55 23-25	feed particle size10mmThe following, Specific surface area of grinding cement330m² /Kg. feed particle size5mmThe following, 400 of specific surface area of cement20m² /Kg Barrel speed 18.5r/min, Grinding body loading: 125t
high fine grinding	φ3.2 ×13.5m	23-25	Feeding particle size ≤5mm Specific surface area of grinding cement 400 ±20m² /Kg Cylinder speed 18r/min, Grinding body loading: 130t
high fine grinding	φ3.5 ×14m	30.35	Feeding particle size ≤5mm Specific surface area of grinding cement 400 ±20m² /Kg Barrel speed 17.1r/min, Grinding body loading: 150t

Slag Vertical Mill

Raw material mill

辽西重型机械

Links:Chaoyang Yellow Pages | Chaoyang Enterprise Network

Website Construction: Power of Chinese Enterprises Jinzhou | SEO Tags