07
2024
-
04
Technical characteristics, structural characteristics and working principle of self-suction flotation machine
Author:
One,Technical characteristics
Self-primingIn addition to the horizontal configuration, the mineral foam self-return, self-priming air and other advantages, the flotation machine has low power consumption, large suction volume and low impeller linear speed. The wear parts have a long service life and the mine surface is stable. It is suitable for the selection of non-ferrous metals, ferrous metals and non-metallic minerals, which is conducive to the improvement of mineral processing indicators.
2. Structure Overview
The structure of self-priming flotation machine is mainly composed of impeller, cover plate, main wheel, central cylinder, groove body and bearing body. The entire impeller mechanism is installed on the main beam of the groove body and is driven by a motor through a triangular belt.
3. features
- Large suction capacity and small energy consumption.
- Self-priming air, self-priming pulp capacity, no step configuration, no need to add foam pump.
- The wear parts have a long service life, and the allowable range of the gap between the impeller and the cover plate is large. As the wear gap between the impeller and the cover plate increases, the suction volume has no obvious change.
- The slurry in the tank circulates in a fixed flow mode, which is conducive to the suspension of coarse minerals.
IV,Working principle
When the main shaft is driven by the motor to rotate the impeller, the slurry in the impeller cavity is thrown out by the centrifugal force, so that the negative pressure is generated in the impeller cavity, and the air is sucked in through the suction pipe. At the same time, the slurry under the impeller is sucked through the central hole of the lower cone disc of the impeller, mixed with air in the impeller cavity, and then thrown out to the periphery through the channel between the cover blades. After leaving the cover channel, the air and a part of the slurry move to the upper part of the flotation tank to participate in the flotation process. The other part of the slurry moves to the bottom of the flotation tank and enters the impeller cavity again by the suction of the impeller, forming the lower circulation of the slurry. The existence of circulation under the slurry is conducive to the suspension of coarse minerals and can minimize the deposition of coarse sand in the lower part of the flotation cell.
Flotation machine,Flotation cell
WhatsApp |