26

2024

-

02

Overflow type ball mill use, structure overview and working principle

Author:


Use:The overflow ball mill is widely used in mining, metallurgy, building materials, chemical industry and other fields, and is suitable for wet grinding of various ores, limestone and other materials. It has the advantages of high grinding efficiency, low energy consumption, simple operation, etc., and can meet different production needs. Our company is a professional ball mill seller, providing various specifications and models of ball mills with reliable quality and superior performance.

And working principle:

Overflow typeThe ball mill is an edge drive, in two forms, a warehouse open flow ball mill, which is mainly composed of the following parts.

1Feeding device

The feeding device is a spiral hopper, which is connected with the feeding device by bolts, and the material is scooped by the spoon head along with the cylinder to enter the mill through the spiral hopper and the conical bushing mounted on the hollow shaft.

2Cylinder part:

The cylinder part is a cylinder formed by rolling and welding of steel plates. Both ends are respectively connected with the end covers of the inlet and outlet ends by bolts, and are horizontally supported on two main bearings. The hollow shafts of the inlet and outlet end covers are respectively equipped with feed tapered bushings and discharge ports.

The rotating part is through a large ring gear fixed at the discharge end of the barrel, and is decelerated by a small gear.

machine, motorDrive.

A liner is arranged inside the cylinder, which protects the cylinder and brings the grinding body to an appropriate height to improve the grinding efficiency.

In order to prevent material leakage from the liner bolt hole and prevent the cooling water drenched on the cylinder from penetrating into the mill, the liner bolt shall be wrapped with two circles of asbestos rope at the position close to the outer wall of the cylinder.(Or green hemp with white lead oil)In order to ensure sealing.

The mill is equipped with two manhole doors for loading and unloading the grinding body and repairing and replacing the parts of the cylinder body.

32. Material Department

The discharging part is composed of a discharging end cover, a grid plate and a discharging port inside the hollow shaft, and the materials are discharged from the circular discharging port.

4Main bearing

The main bearing supports the rotating part. The total weight of the grinding body, materials, etc. is one of the main components to ensure the normal operation of the mill. The bearing bush is supported on the ball stone seat and has a certain self-potential ability to adapt to manufacturing and installation errors. There are two cooling water channels at both ends, which can be connected to cold water pipes from this hole. This cooling system cools the lubricating oil and cools the bearing. When the mill is running, the bearing bush needs continuous lubrication. To this end, each main bearing shall be equipped with a lubricating device, through which oil is poured onto the hollow shaft and then flows back to the oil tank from the bottom.

5Transmission Department

The ball mill adopts a reducer and a pair of gear drive cylinder rotation, its layout form from the feed direction to see the left and right symmetry of the two kinds, the design drawings are right-handed form. If it is arranged according to the left-handed form, all the parts related to the direction of the foundation and the mill should be changed accordingly to meet the requirements of the left-handed form.

Overflow type ball mill,Wet Lattice Ball Mill,Ball Mill,Wet mill